This topic has been closed by the administrator. Comments are no longer accepted.
I looked to see if this was asked anywhere else didn't find it so here it goes I would love to have the "wavy" corrugated roof panels installed over the shingle I have now but I keep hearing don't use it for roofing. I can't seem to get a straight answer why this is so could you please tell me. Depending on the reason I might try it anyway. And also what is the name for this panel?
Or copy this URL:
https://www.metalroofing.com/spirit/comment/15486/find/
Tina,
There are two popular sizes for corrugated (which is the name of the "wavy" tin).
- 2-1/2" between ribs, with a 1/2" tall rib
- 1-1/4" between ribs, with a 1/4" tall rib
In general, the 2-1/2" can be used for both roofs and siding, while the 1-1/4" is only reccommended as a siding material.
Several MRA members manufacture the 2-1/2" corrugated. Some links are below:
http://www.abcmetalroofing.com/panels_corrugated.html
http://www.fabral.com/product.php?id=3
http://www.metalsales.us.com/panel/2.5-corrugated/
(copy and paste the links into the top address bar)
12/25/2010
Or copy this URL: https://www.metalroofing.com/spirit/comment/15486/find/1/5/2011
Or copy this URL: https://www.metalroofing.com/spirit/comment/15487/find/