If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
I have existing metal siding. I am adding an enclosed sunroom with a 312 pitch new metal roof. I understand the side wall flashing from the ridge down. How do you terminate the very end of the flashing where it transitions to the facia. Seems like there’s going to be an opening for Water to get in behind the cut in the existing siding?
4/4/2019
Or copy this URL: https://www.metalroofing.com/spirit/comment/24168/find/Are you using a Z Cleat or something on the end of the panels for the wall flashing to lock onto? If so, the flashing should then extend out over any adjoining trim. Can you post a photo of your situation?
Isaiah Industries, Inc.
4/4/2019
Or copy this URL: https://www.metalroofing.com/spirit/comment/24169/find/Thank you for your response, I am a DIY I have not started the project yet just trying to work out a couple things in my mind. The roofing will be exposed fastener. Installation videos online show butyl tape on the exposed edge of the flashing to the roof but do not go into great detail about the turned up portion of the flashing attached to the existing building. It’s the transition from vertical to horizontal with the existing siding placed over the top of that horizontal termination
4/4/2019
Or copy this URL: https://www.metalroofing.com/spirit/comment/24170/find/