If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
I have a bay window to be roofed in standings seam metal.
The roofer is unfortunately not much use in deciding how to frame this out. Which option would work best? For the flat option how does the flashing work? For the flat version the main roof seams need to be aligned with the bay window seams, which might be pain.
This is to be 1" standing seam metal (Metal Sales Image II panels at 16")
The cheapest job, long term, is the one done right the first time.
11/3/2019
Or copy this URL: https://www.metalroofing.com/spirit/comment/24604/find/In my opinion, "Angled A" will work the best and look the best.
Isaiah Industries, Inc.
11/4/2019
Or copy this URL: https://www.metalroofing.com/spirit/comment/24606/find/Hey Todd,
Is the angle a problem there? With a traditional valley flashing for a shingle roof, "downhill" is always toward the center of the valley.
With the angled option, "downhill" is straight down the flashing.
Maybe that's why the original design included the extra face, so that the valley was a true valley?
The cheapest job, long term, is the one done right the first time.
11/6/2019
Or copy this URL: https://www.metalroofing.com/spirit/comment/24607/find/Bryce, I apologize if I am looking at things incorrectly. The way I look at it, the panels will be perpendicular to the eaves and the valley will need to be a cleated valley where the ends of the panels lock into the valley. Depending upon the dimensions of this, there will potentially be panels that lock solely over the valley cleats and the panel next to them or them or they go into the hip flashing. There will be very long miters along the sides of some of those panels.
Isaiah Industries, Inc.
11/8/2019
Or copy this URL: https://www.metalroofing.com/spirit/comment/24612/find/