If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
I built a very simple work shop with a roof at 14' end to end with a 4/12 pitch. All us complete with underlayment and drip edge. My question is, I am applying R panels that are 36" wide. Too make it even on both ends I will either have a 6" over hang on both sides or I will have to rip both end panels to make it shorter. How much of an over hang do I do if I have 1' soffit all around for the gable sides and front and back? Any assistance is much appreciated. Jody
8/9/2020
Or copy this URL: https://www.metalroofing.com/spirit/comment/25107/find/I would apply a gable edge trim on both ends of the metal roof panels, which will cover the ends. The panels then can be cut to the width you need.
Isaiah Industries, Inc.
8/10/2020
Or copy this URL: https://www.metalroofing.com/spirit/comment/25112/find/