If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
If you would like to reply to this thread, please log in. If you do not have an Ask the Experts forum user account, create one here.
I have 3 plumbing vents that penetrate right on the joint where 2 panels overlap. (PBR panels.)I plan on putting new EPDM boots on and was wondering if I need to take any additional steps because of the seams. Or just install them as if they were in the center of the panel? When the roof was installed they had used lead jacks sealed on top and they started to leak after a couple years. Thanks
10/15/2018
Or copy this URL: https://www.metalroofing.com/spirit/comment/23676/find/Terry,
Look for a dektite style of boot and make sure the area is well cleaned and prepped.
An informed customer is the Best Customer!
10/15/2018
Or copy this URL: https://www.metalroofing.com/spirit/comment/23677/find/Nothing special because of the seam? Extra sealant? Thank you.
10/15/2018
Or copy this URL: https://www.metalroofing.com/spirit/comment/23684/find/Just follow the instructions on the boot and they do spec a decent bit of sealant as a default.
An informed customer is the Best Customer!
10/15/2018
Or copy this URL: https://www.metalroofing.com/spirit/comment/23685/find/